Gadgets

Fix JioFi Device Not Working and Bugs

Fix the problems & issues of JioFi device not working like Automatic Reboot, system error, forget the password, network issues, heating etc.
Update JioFi Firmware

Update JioFi Firmware

JioFi Mi-Fi Wifi router is a portable hotspot introduced by Jio Infocomm LTD. In the box, you have a charger and USB cable. Apart from using as a Wi-Fi hotspot, the JioFi also offers HD voice and video calls with the help of JioJoin app in Wi-Fi connected smartphones.

If you are facing the problem with your JioFi and it’s upgraded version like JioFi 2 or 3 then today I have come up with all potential solution and it’s fixes. The common issues with JioFi like Automatic Reboot, system error, forget the password, network issues, heating etc. There is a simple solution to hard reset the JioFi and solve all these JioFi issues.

How to Hard Reset the JioFi Device?

Hard reset is the process which resets all the device settings back to default thus factory resetting Mi-Fi data.

Reset JioFi to Factory Default Settings

Step 1. Do not remove the battery. Keep the JioFi ON.

Step 2. Remove the back cover.

Step 3. Now look for ‘Reset’ text on the side of WPS button.

Step 4. Use any pin or SIM ejector and press the button inside. (Do not use any sharp object)

Step 5. Press the button for at least 30 seconds.

Step 6. Your JioFi will start blinking and reboot automatically.

Step 7. Connect the JioFi to your browser. And access the Jio services. You need to set up the JioFi configuration again as resetting will delete all the saved settings and data.

Note: For some JioFI devices the reset button may be present above the battery in form of small hole.

How to Fix Red Blinking Signal Issue on JioFi?

I also had the same signal issue on JioFi 3 device.Please follow steps to resolve the red signal blinking issue.

You can perform it after Factory Setting reset.

  • Connect your JioFi to the computer and open a browser like Chrome.
  • Enter the URL http://jiofi.local.html
  • Login with Login ID and password
  • Click User Management tab
  • Click “Restore” to let device restore

Improve JioFi battery backup and Solve any Heating Issue

Under Settings in Admin Control 

  • For Wi-Fi Menu you need to set 802.11 Mode to 2.4 GHz (B), Disable WMM, keep Tx Power to Low and set Channel mode to Automatic.
  • Under Storage Menu Disable Storage account.
  • Under Advanced Settings make Power save to max time available.
Note & Conclusion: The hope the post was helpful. Do comment below any assistance required.

This post was last modified on January 18, 2018 6:43 pm

View Comments

  • please help. there is a red blinking sign on my jiofi device since last week. the customer care number is not reachably by my bsnl sim and the complaint number takes me to the bsnl complaint call. there is no reset button either. the model is JMR540. have visited the retail store but the guy is unabe to help. i bought the device just two weeks back and i am a bit stressed as i see rs 2000 going into drain. do help if you can

  • as u said all done... yet youtube buffers and is really bad connectivit.. if i insert this jio sim in some other phone ... works super... its troubling a lot.

    • Might be some issues with the JioFi. Contact Jio Support.

1 … 13 14 15 16 17 … 44
Leave a Comment
Share
Published by
Nikhil Azza
January 18, 2018 6:43 pm